DOT annual inspection rules (49 CFR 396.17)

Every commercial motor vehicle, including each trailer and converter dolly in a combination, must pass a DOT annual inspection at least once in the preceding 12 months, and proof of that inspection must be on the vehicle. The carrier can inspect its own vehicles with a qualified inspector or use a qualified shop.

On this page
  1. The annual DOT inspection rule
  2. Who may do a DOT periodic inspection
  3. Use a DOT inspection checklist built from appendix A
  4. Track it per vehicle
  5. FAQ
  6. Sources

Not a government website. We are a private company, not affiliated with the Federal Motor Carrier Safety Administration (FMCSA), the U.S. DOT or any government agency. USDOT registration and the MCS-150 update are free at fmcsa.dot.gov. We never file, register or pay anything for you.

The annual DOT inspection rule

The annual DOT inspection rule says a motor carrier must not use a commercial motor vehicle unless each component listed in appendix A to Part 396 has passed an inspection at least once during the preceding 12 months, and documentation of that inspection is on the vehicle.[1] The rule counts each vehicle in a combination: for a tractor pulling a semitrailer and a full trailer, the tractor, the semitrailer, the full trailer and the converter dolly each need their own inspection.

What the 12-month inspection proof must show (49 CFR 396.17(c))
ItemRequired on the report or decal
DateThe date of the inspection
Who keeps the reportName and address of the motor carrier or other entity where the inspection report is kept
VehicleInformation that identifies the vehicle, if it is not clearly marked
CertificationA statement that the vehicle passed an inspection under 396.17

The proof on the vehicle can be the inspection report itself or another document based on it, such as a sticker or decal, as long as it carries those four items.[1]

Who may do a DOT periodic inspection

A DOT periodic inspection can be done by the motor carrier itself for vehicles under its control, or by a commercial garage, fleet leasing company, truck stop or similar business acting as the carrier’s agent, if it has proper facilities and employs qualified inspectors under 49 CFR 396.19.[1] Some states run their own periodic inspection programs; a vehicle that passes a state program meeting the federal minimum standards counts as inspected for 12 months starting from the last day of the month of that inspection.

  • Owner-operators: you may inspect your own truck only if you meet the inspector qualifications; otherwise use a qualified shop and keep its report.
  • Leased trailers: the carrier using the trailer must make sure a current inspection is on it before use.
  • Intermodal chassis: intermodal equipment providers must inspect the equipment they tender to carriers.

Use a DOT inspection checklist built from appendix A

A good DOT inspection checklist follows appendix A to Part 396, the federal list of components every periodic inspection must cover: brake systems, coupling devices, exhaust, fuel system, lighting, safe loading, steering, suspension, frame, tires, wheels and rims, and windshield glazing, windshield wipers, motorcoach seats and rear impact guards. Appendix A also lists the defects that make a vehicle fail, such as a brake stroke beyond the readjustment limit.[1] Keep the signed report in the vehicle’s maintenance file and the proof on board. Running a vehicle after its 12 months are up breaks the rule in 396.17(c) even if nothing on it is broken.

Track it per vehicle

The annual vehicle inspection is a rolling date for each truck and trailer, not one date for the fleet. Write each unit’s due date as 12 months after its last passed inspection, and plan the shop visit a few weeks earlier. Pair it with the other per-vehicle items: the Form 2290 due date every August, apportioned plates plates and insurance, which must stay in force with the MCS-90 endorsement where it is required.[2] The per-driver items are the Clearinghouse annual query and the driver qualification file. See them all on the DOT compliance checklist, or let the trucking compliance calendar remind you before each unit is due.

Frequently asked questions

How often is a DOT annual inspection required?
At least once during the preceding 12 months for each commercial motor vehicle, including each trailer and converter dolly, with proof of the inspection on the vehicle.
Can I do my own annual DOT inspection?
Yes, if the person inspecting meets the inspector qualifications in 49 CFR 396.19. Otherwise use a qualified commercial garage, leasing company or truck stop as your agent.
Does a state inspection count as the annual DOT inspection?
Yes, if the state program meets the federal minimum standards in appendix A. It counts for 12 months from the last day of the month of the state inspection.
What must the inspection decal show?
The inspection date, the name and address of the carrier or other entity that keeps the report, vehicle identification if the vehicle is not clearly marked, and a certification that it passed under 396.17.

Sources

  1. 49 CFR 396.17, Periodic inspection · eCFR, Office of the Federal Register, 2026-11-15
  2. 49 CFR 387.7 and 387.9, Financial responsibility (MCS-90) and minimum levels · eCFR, Office of the Federal Register, 2026-11-15