Apportioned plates and IRP registration

Apportioned plates are the single registration your base state issues under the International Registration Plan (IRP) for a truck that runs in two or more member jurisdictions. A power unit qualifies with two axles over 26,000 pounds, three or more axles, or a combination over 26,000 pounds; fees are shared by distance in each state.

On this page
  1. Who needs apportioned plates
  2. IRP registration in your base jurisdiction
  3. IRP renewal and the registration year
  4. IRP plates are not IFTA, UCR or the USDOT update
  5. FAQ
  6. Sources

Not a government website. We are a private company, not affiliated with the Federal Motor Carrier Safety Administration (FMCSA), the U.S. DOT or any government agency. USDOT registration and the MCS-150 update are free at fmcsa.dot.gov. We never file, register or pay anything for you.

Who needs apportioned plates

You need apportioned plates for an apportionable vehicle: a power unit used, or meant to be used, in two or more member jurisdictions that carries persons for hire or is built or used mainly to carry property, and that has two axles with a gross or registered weight over 26,000 pounds (11,793 kg), or three or more axles at any weight, or is used in a combination over 26,000 pounds.[1] Recreational vehicles, vehicles with restricted plates and government vehicles are not apportionable; a lighter power unit may still be registered under the Plan if the owner chooses. Trailers are registered under the Plan only in limited cases.[1]

Apportionable vehicle test (IRP definitions)
Power unitApportioned plates?
Two axles, over 26,000 lb, interstateYes
Three or more axles, any weight, interstateYes
Combination over 26,000 lb, interstateYes
26,000 lb or lessOptional
One state onlyNo: regular state plates

IRP registration in your base jurisdiction

IRP registration happens in one place: your base jurisdiction issues the only plate and cab card for each fleet vehicle, and the fees you pay are spread among the jurisdictions you drive in according to the distance in each.[2][1] The Plan covers the contiguous United States, the District of Columbia and the Canadian provinces.[2] To use a jurisdiction as your base you need an established place of business there: a physical structure you own or lease, open and staffed during business hours by your own employees, not just a mail drop.[1]

  • Cab card: the evidence of registration, besides the plate, that the base jurisdiction issues and that rides in the vehicle.[1]
  • Trip permits: a member jurisdiction may issue a trip permit instead of apportioned or full registration, for example for a short move.[1]
  • Records: keep the distance records your application is based on for three years after the registration year ends; they can be audited.[1]

IRP renewal and the registration year

IRP renewal follows your registration year, which is the twelve-month period set by your base jurisdiction’s law; it is not one national date.[1] A base jurisdiction may use staggered registration, and a registration can be shorter than 12 months to fill out the rest of a registration year, so check the expiry on your cab card and put that month on your calendar. The distance you report comes from a fixed reporting period: the 12 months ending June 30 of the year before the registration year starts, or the previous such period if your year starts in July, August or September.[1] Put it next to the IFTA due dates, which come from the same base jurisdiction.

IRP plates are not IFTA, UCR or the USDOT update

IRP plates cover registration fees; fuel tax is separate. IFTA uses a similar weight and axle test for a qualified motor vehicle (two axles over 26,000 pounds, three or more axles, or a combination over 26,000 pounds) but has its own quarterly returns and a license that ends December 31.[3] UCR registration is a separate yearly fee, the Form 2290 due date goes to the IRS, and the free MCS-150 update keeps your USDOT record current. The DOT compliance checklist lists them side by side, and the trucking compliance calendar adds your plate renewal month to your reminders.

Frequently asked questions

What are apportioned plates?
A single registration your base jurisdiction issues under the International Registration Plan for a truck that runs in two or more member jurisdictions. Fees are shared among those jurisdictions by distance.
Who needs IRP plates?
Power units used in two or more jurisdictions with two axles over 26,000 pounds, three or more axles, or a combination over 26,000 pounds, that carry property or carry persons for hire.
When is IRP renewal due?
At the end of your registration year, a twelve-month period set by your base jurisdiction. The expiry is on your cab card.
How long do I keep IRP mileage records?
Three years after the close of the registration year the application covers.

Sources

  1. International Registration Plan with Official Commentary (definitions; sections 525 and 1000-series records) · International Registration Plan, Inc., effective January 1, 2024 (archived copy; verify the current Plan with IRP, Inc.)
  2. About the International Registration Plan · International Registration Plan, Inc., archived copy of August 31, 2025; verify with IRP, Inc.
  3. IFTA Articles of Agreement (R245, R610, R930, R960), revised 11 Mar 2026 · International Fuel Tax Association, Inc., revised March 11, 2026 (archived copy of April 18, 2026)